Differential thermal analysis: temperature under program control, the relationship and difference of temperature between the measured material and the reference. The DTA curves is to describe the changing relationship depending on temperature and time between the measured material and the reference compound. During the test, the sample temperature changes due to the phase change or an endothermic or exothermic reaction effects. For example: the phase transition, melting, changing the crystal structure, boiling, sublimation, evaporation, dehydrogenation, cracking or decomposition reaction of oxidation or reduction reaction, destroy the lattice structure.
| Temperature range | room temperature ~ 1150℃ (SKZ1055A) |
| room temperature ~ 1350℃ (SKZ1055B) | |
| Measure Range | 0 ~ ± 2000μV |
| DTA Accuracy | ± 0.1μV |
| Heating rate | 1 ~ 80 ℃ / min |
| Temperature Resolution | 0.1 ℃ |
| Temperature accuracy | ± 0.1 ℃ |
| Temperature Repeatability | ± 0.1 ℃ |
| Temperature control | Heating : process control parameters can be adjusted |
| Cooling : air-cooled process control | |
| Thermostat : Programmable thermostats, can be set | |
| Furnace | With the lid, instead of the traditional lift furnace |
| Air-flow | gas flow meter ( Optional) , the atmosphere converter |
| Data interface | standard USB interface cable and operating software |
| Display | 24bit color 7-inch LCD touch- screen display |
| Parameter Standard | With calibration function, can calibrate the temperature |
| Baseline Adjustment | Users can adjust by baseline slope and intercept |
| Power | AC 220V 50Hz |
Good quality is inseparable from careful polishing. SKZ treats every exhibit with care to provide you with the best quality!
Shipment
1000
Provide air, sea and shipping services according to customer needs
Provide fumigation-free plywood boxes or multi-layer cartons, wrapped with plastic film inside
Delivery within two weeks
Low minimum order quantity OEM
EN
